

When you test the USB device and controller card, it is recommended that you do the following: When you test your cables, it is recommended that you do the following: Ideally, you should test a component that you know works in another setup. Use a different USB cable, device, and controller card in your setup to see if the problem persists. Use the USB cable, device, and controller card in another setup to see if the problem is with the components or the setup. To test your setup components, try the following: You can test to make sure that the following components are working correctly and are not the source of the issue: When you troubleshoot issues with a USB controller card, there are some quick tests that you can complete to rule out potential problems.

#Flash usb storage for mac low profile serial#
Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “ Root Hub” in the name.Clear the box next to Allow the computer to turn off this device to save power.Right-click the first USB Root Hub device and select Properties.Expand Universal Serial Bus controllers by clicking the arrow to the left of it.On your desktop, right-click the My Computer icon and select Properties.Click the Start button and select Control Panel.Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.Click Change plan settings for the plan you want to change.Click Hardware and Sound, then click Power Options.On your keyboard, press the Windows key + X and select Control Panel.
#Flash usb storage for mac low profile how to#
The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening. If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. PCI Express enabled computer with an available PCI Express x1 slot or higher
